DIY: Super Hero Shield

As I’ve said before, we are a nerdy household. There is a lot of comic books, comic book clothes, and comic book art everywhere. CT has grown up around this, so of course she likes it all too. She pretends her blankets are capes, she has little people super heroes and if you put her in a comic book shop she can name off about a dozen characters perfectly.

Don’t worry, she also loves princesses, dressing up and everything else girly. CT is a very well rounded toddler.

Her 2nd birthday is coming up soon. Next Sunday to be exact. I really wanted to make her a few of her gifts, something she would actually enjoy and play with. I’ve been thinking about it for awhile actually, and I ended up choosing a cape and shield.

I started with the shield. I wanted to do an actual Captain America’s shield, all red white and blue, but apparently I forgot to buy blue felt. I had a horribly stressful time the last time I went to Joanns (xmas shoppers are CRAZY), So I just said “whatever” and made it Red, White and Pink.

Want to know what the coolest part about this shield is?

It’s form is made with help from a frisbee!!! Yep, I thought of this while picking up CT toys one day. I didn’t know if it would actually work, so I was pleasantly surprised when it did!

Would you like to make your own? I made sure to take photo’s while I was putting this together. So if your interested, keep reading…

Supplies Needed:

  • a frisbee, mine was a 9″ plastic one from the dollar store
  • a piece of red felt approximately 11″x24″ (cut from a bolt)
  • a piece of 3/4″ elastic about 4-5″ long
  • a loose piece of white felt (the kind found in sheets)
  • a loose piece of grey felt (the kind found in sheets)
  • a loose piece of either pink or blue felt (the kind found in sheets)
  • a glue gun with glue sticks
  • tacky glue
  • star and circle template
  • scissors
  • coordinating thread for each piece of felt (optional)
  • a compass (if your frisbee isn’t 9″)

 

I’m not too great at showing how I did things. I warn you ahead of time! If something seems like it’s missing, just comment below and I’ll fix it.

First thing, print out the star and circle template. I know it looks like all one pattern piece, it isn’t. I just wanted to save paper and fit it all on one piece of paper. I suggest cutting out the large circle first, tracing it on the felt. Then move onto the next size until you come to the star. you should end up with 3 SOLID felt circles and one star. not rings. Trace each piece onto felt and cut them out. I made sure to label each piece.

After you have all your template pieces traced and cut out, get the frisbee and trace it onto the felt TWICE. make sure to leave about an inch around one of the outlines when tracing (you need that extra felt for stretching over the edge later). Cut out one of the circles on the traced line. Cut out the other circle with a 1″ allowance around the entire thing.

Put the smaller frisbee circle aside, you’ll need it later. Take all your other circles and stack them, trying to make them as even as possible. As pictured above. Once you have them the way you like, glue them in place. If you are choosing to not top-stitch or hand-stitch the edges, I would suggest gluing all the way to the edge and securing all the edges as well as you can. If you plan on sewing the pieces just use enough glue to keep them all in place. I used tacky glue. My specific glue required that I wait about 2 hours for it all to dry. It really needs to be completely dry before you can continue.

Ok, so this step is if your top-stitching or hand-stitching yours. Shown above is me top-stitching. I pinned the pieces just to give that last bit of security. I just used a small stitch around the edge of each piece. You could also hand-stitch this in the same manner, or any manner you like! I will say that there is a lot of bulk around the star, My machine can normally handle a lot, but it had some issues there. Seriously a first for me. Once your finished, clip all the loose threads and set the front piece aside. For now.

Now were onto the back piece. Using some of the leftover red felt and cut out two rectangles measuring approximately 2″x3″. enough to cover the ends of the elastic.

Pin the piece of elastic to the back of the other red piece of felt, not the front piece we just put together. Try and center it (I forgot to take a picture of this step). To make it all really secure I zigzag stitched the short edges to the felt, as shown above. You could also hand sew it. I just wanted to make sure it didn’t break on CT.

Next place a small rectangle on each end of the, now secured, elastic. I pinned mine. This will make the handle even more secure and cover up the raw ends of the elastic. Stitch in anyway you choose, I top-stitched just like I did on the front piece.

Were almost done. Now is the time to plug in your glue gun and get it nice and hot. I used a bunch of glue sticks, so I suggest having a few extra easily at hand.

take your front piece, the one that has all the rings and star on it and place it design side DOWN. Place just enough glue on the back side to hold the frisbee lightly. Center the frisbee and attach the top of the frisbee to the back side of the front piece. Flip it over and see how centered it is. If it’s not to your liking, take them apart and try again. That’s why I suggested not too much glue.

I stretched the sides over the same way I would stretch a canvas. You glue one small piece on one side, then go to the opposite side and pull the fabric taught and glue a little, then turn it slightly and repeat. This way you will have a nice even stretched piece. You can kinda see what I’m talking about in the photo above. Also, while doing this, please be very careful! It really hurts when you burn yourself with hot glue, make sure to either cover your fingertips or be very gentle and don’t rush.

This is what it should look like once it’s all stretched and secured.

Next step… glue the back piece, the one with the elastic attached, to back of the frisbee. I would only glue the center, just to secure it. Then once it’s centered glue all the edges down. Secure it as nicely as you can.

This is what the back should look like once your done! Which by the way, your done!!! Hot glue dries super super quick, so your new shield is all ready to be played with and enjoyed!!

I don’t have real action shots yet since CT won’t be opening her gifts for a whole week.

I would love to see all the finished shields you guys make!! Maybe you’ll go with a different super hero? Maybe you’ll use your child’s initial? Or a different sized frisbee? The possibilities are endless. Anything goes when your fighting crime.

Next up… A cape! A girl themed cape, of course.

Pin It

If You Enjoyed This Post, You May Also Like...

7 thoughts on “DIY: Super Hero Shield

  1. Pingback: Marvel’s The Avengers Themed Crafts and Activities! |

  2. Pingback: 40 DIY Halloween costumes for Kids

  3. It would be a little easier to sew the star to the smallest circle first, then sew the small circle to the middle-sized circle, and last of all sew the middle-sized circle to the large circle. Doing it that way you are only sewing two layers together at any time. :-)

  4. Pingback: Teenage Mutant Ninja Turtle DIY Masks and Manhole Covers for Dress Up Play | Lime Lane Love

Leave a Reply to ImNotMaryBeth Cancel reply

Your email address will not be published. Required fields are marked *

* Copy This Password *

* Type Or Paste Password Here *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>